MOQ: 100358 Anti-Climb Fence Panel 76.2 x 12.7 mm
358 profile welded panel: 76.2 x 12.7 mm aperture, 4.0 mm wire welded at every intersection. No toehold for a climbing boot, no cut with hand tools.

Security Isolation Fence with Barbed Wire Top — Y-Post

3.0 m anti-climb panel on Y-posts, two strands of barbed wire angled outward. For airport, duty-free, prison and border perimeters where going over is the risk.
This is a perimeter built around one assumption: the person on the other side will try to go over the top. The panel is 358 mesh on a Y-shaped post, with a barbed wire arm raking outward at 45 degrees. Aperture, wire, ground gap and top arm are specified together, because a fence is only as strong as its weakest layer.
Most perimeter breaches on record start at the ground, not at the top: a panel lifted off its posts, or a gap dug under the bottom rail. Two details close that. The ground clearance is held to 50 mm maximum, set against a concrete kerb where the soil is soft, and the panels are fixed with clamp bars and M8 security bolts rather than clips that can be lifted off with a screwdriver. Where the perimeter crosses a drainage line or a culvert, we supply an infill panel rather than leaving the opening to the site contractor.
The same profile is made as single and double leaf gates with drop bolts, closers and a lock box. Post bases are set in concrete with cast-in anchors; where the fence runs along a wall or kerb, post shoes are used instead. If the project includes fence-mounted intrusion detection, we drill and bracket for it at the factory so the sensor line does not have to be clamped to a finished panel on site.
Standard is hot-dip galvanized to 240 g/m² before powder coating at 60–80 µm, tested to EN 10244-2 — this is the version to specify on coastal airports, where a 40 g/m² pre-galvanized panel will show red rust at the cut edges within three to four years. Colours: RAL 6005 green, 7016 anthracite, 9005 black.
Airport and airbase perimeters, duty-free and customs zones, prisons and detention centres, border crossings and land borders, military and police facilities, water and power infrastructure, and industrial sites with a regulated perimeter.
Total fence length, required total height above ground (3.0 m, 3.6 m or 4.2 m), barbed wire or razor coil, gate positions and widths, wall or ground fixing, and whether intrusion detection or CCTV brackets are part of the package. Send the site plan and we will return a marked-up layout with post positions and quantities per line.
These sites are listed for one reason: someone will try to get through. Aperture size and wire diameter decide how long that takes; post spacing and coating class decide how long the fence survives the site. Both matter more than panel height.
3.0 m anti-climb panel on Y-posts, two strands of barbed wire angled outward. For airport, duty-free, prison and border perimeters where going over is the risk.
| Mesh Type | 358 welded mesh panel on Y-post |
|---|---|
| Mesh Aperture | 76.2 x 12.7 mm |
| Wire Diameter | 4.0 mm, welded at every intersection |
| Panel Height | 2.4 m or 3.0 m panel; 3.0–4.2 m total height with the arm |
| Panel Width | 2.5 m |
| Post Type | 60 x 60 x 3.0 mm SHS with welded Y-arm at 45 degrees |
| Post Spacing | 2.5 m |
| Top Design | Y-arm carrying 2 strands barbed wire, or 450 mm razor coil |
| Barbed Wire | 2 x 2.5 mm wire, 4-point barbs at 75 mm |
| Coating | Hot-dip galvanized 240 g/m² + polyester powder 60–80 µm (EN 10244-2) |
| Colors | RAL 6005, 7016, 9005 |
| Install Type | Cast-in anchors on concrete; post shoes on wall or kerb; ground clearance 50 mm max |
| Standard | BS 1722-14, EN 10244-2, EN 13438 |
FOB Tianjin, per m2
Loading figures are typical for standard export packing; the final loading plan is confirmed with the quotation.
FOB Tianjin. Indicative price for reference only; final quotation valid 30 days from issue.
Factory-direct price · FOB / CIF · Reply within 24 hours
MOQ: 100358 profile welded panel: 76.2 x 12.7 mm aperture, 4.0 mm wire welded at every intersection. No toehold for a climbing boot, no cut with hand tools.
MOQ: 1008/6/8 construction: two 8 mm horizontal wires clamping a 6 mm vertical, 50 x 200 mm aperture. Stiffer than single-wire mesh, cheaper than 358.
MOQ: 50Rental-fleet panel: 1-5/8 in OD frame, 2 in x 4 in welded mesh, stackable steel feet. Couplers and pins match existing North American stock.
MOQ: 50AS 4687 panel: 2100 mm high, 2400 mm wide, 32 mm frame, 60 x 150 mm mesh. Concrete block or plastic foot, clips to link panel to panel.